Compression molding press
A hydraulic compression press for plastics and rubber is an industrial machine that uses hydraulic fluid pressure and heated mould to shape and cure raw plastic materials (especially thermosets and composites) into solid, uniform parts. It applies immense, controllable force to compress and distribute softened material within a closed cavity.
Our compression molding presses are used to produce an extensive variety of innovative automotive, aerospace, industrial, and consumer products.
Key Press Machines Offered
Cold Isostatic Press (CIP): Engineered for compacting PTFE powders and resin, often available in capacities up to 1,000 Ton.
Compression/Moulding Press: Versatile systems used for shaping PTFE and heavy-duty rubber.
Double Action Hydraulic Press: Delivers uniform compressive force and sliding guidance,
Rubber Molding Press: Available as both hot and cold press machines for creating moulded rubber products.
Other Equipment: They also manufacture PTFE pipe extruders, PFA injection transfer moulding machines, and sintering ovens.
- 30-Ton to 50-Ton: Removing or installing bushings, bearings, gears, and U-joints; basic sheet metal bending and component straightening.
- 100-Ton to 200-Ton: Industrial deep drawing of metal components, large-scale punch press operations, blanking, powder moulding/compacting, and heavy automotive assembly.
- Composite Materials: Processing fiberglass, Sheet Moulding Compound (SMC), and Bulk Moulding Compound (BMC) for automotive body panels and aerospace parts.
- Plastic Sheets: Forming large, thick sheets of dense plastics like HDPE or PP.
- Rubber and Silicone: Manufacturing heavy-duty seals, gaskets, and consumer products.
- Laboratory and Industrial production applications.
- The specifications shift substantially as capacity moves from a light workshop model (30 Ton) to a high-capacity production unit (200 Ton):
| Parameter | 30 Ton Press | 200 Ton Press |
|---|---|---|
| Nominal Force / Capacity | 30 Tons | 200 Tons |
| Operation Mode | Manual / Automatic | Manual / Semi-Automatic / Fully Automatic with HMI-PLC |
| System Fluid Pressure | 150 – 200 Bar | 240 – 315 Bar |
| Piston Ram Stroke | 150 mm – 250 mm | 250 mm – 600 mm |
| Maximum Daylight (Opening Height) | Up to 900 mm | 600 mm – 1000 mm |
| Working Table Bed Size | 200 × 200 mm to 500 × 1000 mm | 700 × 400 mm to 1260 × 1200 mm |
| Electric Motor Power | 1.5 kW to 3 kW | 4 kW to 15 kW |
| Operation Voltage | Single Phase or Three Phase | Single Phase or Three Phase |
| Approximate Net Weight | 130 to 380 kg | 1650 to 2450 kg |
- Robust Four Pillar construction.
- Emergency safety stop switch.
- Heating and cooling platens – in built.
- Digital and Touch screen operation panels.
- Auto or manual cycle operations.
- Operator friendly.
- Minimum maintenance design.
